PART 1: AGRICULTURAL AND BIOSYSTEMS ENGINEERING LAWS AND RELATED LAWS

RED (WRONG ANSWER)  / GREEN (CORRECT ANSWER) 

Question 1: An act regulating the practice of agricultural engineering in the Philippines approved on February 13, 1998.. This Act shall be known as the "Philippine Agricultural Engineering Act of 1998." It was enacted by the House of Representatives and the Senate. The law aims to promote and upgrade the practice of the profession by instituting measures that will result in relevant agricultural engineering education and better career prospects for professional agricultural engineers.

A) RA 3927

B) RA 8559

C) RA 10915

Question 2: It refers to a person who is registered and licensed to practice agricultural and biosystems engineering in the country and who holds a valid certificate of registration and professional identification card from the Board of Agricultural and Biosystems Engineering and the PRC.

A) Agricultural and Biosystems Engineer

B) Agricultural and Biosystems Engineering

C) Agricultural and Biosystems Power and Machinery

Question 3: Memorandum Circular (MC) informing all City and Municipal Building Officials, all City and Municipal Engineers regarding the Implementation of RA 8559, this is to supplement to the Memorandum Circular No 2000-18 series of 2008, adopting the “Agricultural Engineering Permit Form” to be used as part in the processing and approval of building permit for agricultural buildings and structures.

A) BOAE Memorandum Circular No 2000-18 series of 2008

B) BOAE Memorandum Circular No 2009-17 series of 2009

C) BOAE Memorandum Circular No 2009-17 series of 2009

D) BOAE Memorandum Circular No. 2005-09 Series of 2005

Question 4: It refers to machinery and equipment for the production, harvesting, processing, storage, manufacture, preserving, transporting and distribution of agricultural and fisheries products.

A) Agricultural and fisheries machinery

B) Agricultural and fisheries mechanization

C) Agro-industrial processing

Question 5: The first republic act promulgated for the practice of agricultural engineering in the Philippines. This Act shall be known as the "Philippine Agricultural Engineering Law." It was enacted on June 18, 1964.

A) RA 8559

B) RA 3927

C) RA 10915

Question 6: It refers to farm power and machinery for the production, harvesting, processing, storage, manufacture, preserving, transporting and distribution of agricultural and biological products/materials and includes, but is not limited to, tractors and their attachments, power tillers, seeders, transplanters, windmills, harvesting machines, crop protection and maintenance equipment, irrigation equipment and accessories, greenhouses and other thermal conditioning equipment, livestock, poultry, fishery and forest equipment, slaughtering equipment, meat/fishery and crop processing equipment, postharvest machines such as milling machines, dryers, threshers, grain and other strippers, agricultural transport machinery and storage.

A) Agricultural and Biosystems Power and Machinery

B) Agricultural and Biosystems Engineer

C) Agricultural and Biosystems Engineering

Question 7: It includes agricultural power and bio-energy, machine design and analysis, machinery management and mechanization of agricultural and bioproduction systems.

A) Land and Water Resources Engineering

B) Agricultural and Biosystems Power, Energy and Machinery Engineering

C) Agricultural and Biosystems Structures and Environment Engineering

Question 8:It refers to measures of conservation and proper management of agricultural and biological resources such as, but is not limited to, area development for agriculture, settlement and recreation; parks and plant nurseries; beneficial ecosystem of life and environment; study and analysis of agricultural system as an integrated component of landscape; monitoring and conservation of natural resources; rehabilitation of forest, lakes, rivers and idle lands; and the sustainable development, management, and exploitation of the agricultural ecosystem.

A) Agricultural and Biosystems Automation and Instrumentation

B) Agricultural and Biosystems Resource Conservation and Management

C) Agricultural and Bio-Information System

Question 9: It shall be issued to those who are registered after payment of fees prescribed by the Commission. It shall bear the signatures of the Chairperson of the Commission and of the Chairperson and members of the Board, stamped with the official seal of the Commission and of the. Board, certifying that the person named therein is entitled to the practice of the profession, with all the privileges appurtenant thereto.

A) A certificate of registration

B) A professional identification card

C) None of the above

Question 10: It refers to the development, adoption, assembly, manufacture and application of appropriate, location specific and cost-effective agricultural and fisheries machinery using human, animal, mechanical, electrical, renewable and other nonconventional sources of energy for agricultural production and postharvest/postproduction operations consistent with agronomic conditions and for efficient and economic farm and fishery management towards modernization of agriculture and fisheries

A) Agro-industrial processing

B) Agricultural and fisheries machinery

C) Agricultural and fisheries mechanization

Question 11: It contains the registration number and its validity and expiry dates duly signed by the Chairperson of the Commission shall likewise be issued to every registrant who has paid the prescribed fees, and has submitted a certificate of membership in good standing from the AIPO and proof of completion of the CPD requirements. The said card shall be renewed every three (3) years, subject to requirement/s as the Board may thereafter prescribe and upon proof of completion of the mandatory CPD requirements.

A) A certificate of registration

B) A professional identification card

C) None of the above

Question 12: It includes agrometeorology, irrigation and drainage engineering, soil and water conservation, and aquaculture engineering.

A) Hydrologic Engineering

B) Agricultural and Biosystems Structures and Environment Engineering

C) Agricultural and Biosystems Power, Energy and Machinery Engineering

D) Land and Water Resources Engineering

Question 13:It provides a system of rules and regulations for the maintenance of high standards of competence and integrity of agricultural engineers in the performance of their responsibilities in the practice of their profession.

A) Philippine National Standards

B) Mission

C) Code

Question 14: It refer to buildings and structures for the production, harvesting, processing, storage, manufacture, preserving, transporting and distribution of agricultural and biological products/materials and includes, but is not limited to, silos and its components, agricultural and biosystems machinery and equipment sheds, farm houses, green/screen houses, poultry houses, piggery houses, slaughterhouses, farm-to-market roads, farm bridges, agricultural and biological products storage/warehouse, buildings and structures for poultry, livestock, fishery, and forestry production and processing, kiln drying and lumber treatment structure, farm equipment, farm supplies, and other structures such as self-feeders, and soil and water conservation structures.

A) Agricultural and Biosystems Power and Machinery

B) Agricultural and Bio-Processing

C) Agricultural and Biosystems Buildings and Structures

Question 15: It shall serve as Code of Technical Standards of all registered and licensed agricultural and biosystems engineers in the practice of their profession.

A) Code of Ethics

B) Philippine Agricultural Engineering Law.

C) Philippine National Standards (PNS)

D) Philippine Agricultural and Biosystems Engineering Standards (PABES)

Question 16: These are agreements in which a person or business agrees to specific terms and conditions that can be legally enforced. It is also where responsibilities and obligations are outlined and agreed upon by the two parties involved.

A) Engineering Contract

B) Business Permit

C) Contract

Question 17: It will also be used or tapped as a facility for the online registration of agri-fisheries machinery and equipment, and monitoring of agri-fisheries mechanization and infrastructure projects. This network shall be linked to other existing information and database networks of the DA, the Agricultural Machinery Information Network of the Department of Scienceand Technology (DOST), the Agricultural Mechanization DevelopmentProgram of the UPLB and of other government agencies.

A)Agri-fisheries Mechanization and Engineering Resource Network (AFMech ERN)

B) Agricultural Machinery Testing and Evaluation Center (AMTEC)

C) Agri-fisheries Machinery and Equipment Service Centers

Question 18: A function of an engineering contract which should give the expected time frame for the project and a deadline for total completion. Companies usually provide payment for the project at its beginning, so it is especially important to set deadlines in a contract.

A) Termination

B) Payment

C) Scope of work

D) Period of performance

Question 19: A function of an engineering contract which clearly lays out what is expected of the contracted engineer. To be completely clear, the company proposing the work should outline each task that is part of the project and provide deadlines. They should also be clear about their vision for the project and the end goal. Any parts of the project that should not be handled by the contracted engineer should be clearly stated in the contract.

A) Scope of work

B) Period of performance

C) Payment

D) Termination

Question 20: A function of an engineering contract which make sure that products and services are paid for in a timely manner.

A) Scope of work

B) Period of performance

C) Payment

D) Termination

Question 21: A function of an engineering contract which identify the grounds on which the client or contractor may terminate the contractual relationship. It provides a framework for how to proceed if either party defaults or breaches certain terms of the contract.

A) Scope of work

B) Period of performance

C) Termination

D) Payment

Question 22:It is also called a fixed price contract. This type of contract requires the contractor to agree to perform the specified work outlined in the contract for one fixed price.

A) Lump-Sum Contracts

B) Measurement Contract

C) None of the above

Question 23: It is also called a re-measurement contract or a measure and value contract. This type of contract includes a Bill of Quantities (BOQ) that the employer provides when the engineering design can be explained in detail, but the quantity of work cannot.

A) Contract Breach

B) Technical Documents of Contract

C) Lump-Sum Contracts

D) Measurement Contract

Question 24: It shall be circular in shape with 42mm diameter, drawn with dodecagon 5mm inward measured from circumference to one of its sides. Top and bottom sides of the dodecagon shall rest horizontally straight. A 5mm width rectangular band shall be drawn horizontally across the middle part of the seal with end points resting on the dodecagon.

A) The seal of an agricultural and biosystems engineer

B) The name of the agricultural and biosystems engineer

C) Logo of the name of the agricultural and biosystems engineer

D) PRC registration number

Question 25: This Act shall be known as the “Philippine Agricultural and Biosystems Engineering Act of 2016”. An Act Strengthening, Modernizing and Aligning the Practice of Agricultural Engineering in the Country into the Internationally Recognized Practice of Agricultural and Biosystems Engineering, and for Other Purposes. Lapsed into law on July 21, 2016.

A) RA 3927

B) RA 10915

C) RA 8559

Question 26: It refers to utilization of information systems, database, and other information management tools for agricultural use, biological systems modeling to understand the mutual response between life and the environment; and application of Geographic Information System (GIS) technology for inventory, analysis, and management of agricultural and biological resources, and remote sensing technology for observation and examination of the landscape and its local forms and agricultural activities.

A) Agricultural and Bio-Information System

B) Agricultural and Bio-Processing

C) Agricultural and Biological Waste Utilization and Management

Question 27: It shall be printed inside the rectangle at readable scale. The sides of the dodecagon represent the twelve (12) functional scope of practice of agricultural and biosystems engineer enumerated under Section 5 of RA 10915.

A) The name of the agricultural and biosystems engineer

B) PRC registration number

C) The seal of an agricultural and biosystems engineer

Question 28: Memorandum Circular (MC) addressing all Chairmen and Members of the Bids and Awards Committee of DA, DAR, SCUs, LGUs, ARMM and all concerned NGOs, Government Owned and Controlled Corporations. Regarding the Implementation of RA 9184, the procurement of Agricultural and Fishery Infrastructure facilities, machineries, equipment and consulting services on Agricultural engineering in relation to RA 8559.

A) BOAE Memorandum Circular No 2000-18 series of 2008

B) BOAE Memorandum Circular No. 2005-09 Series of 2005

C) BOAE Memorandum Circular No 2009-17 series of 2009

D) BOAE Memorandum Circular No. 2009-09 Series of 2009

Question 29: An act prescribing urgent related measures to modernize the agriculture and fisheries sectors of the country in order to enhance their profitability, and prepare said sectors for the challenges of globalization through an adequate, focused and rational delivery of necessary support services, appropriating funds therefor and for other purposes.

A) Agriculture and Fisheries Modernization Act (AFMA) of 1997/Republic Act No. 8435

B) Agricultural and Fisheries Mechanization (AFMech) Law/ Republic Act No. 10601

C) None of the above

Question 30: It is defined the development, adoption, manufacture and application of appropriate location-specific, and cost-effective agricultural technology using human, animal, mechanical, electrical and other non-conventional sources of energy for agricultural production and post-harvest operations consistent with agronomic conditions and for efficient and economic farm management.

A) Agro-Processing Activities

B) Agriculture and Fisheries Modernization

C) Agricultural Mechanization

Question 31: It includes agricultural structures engineering, forest engineering, design and management of agricultural and biosystem structures, and bio-environmental design.

A) Land and Water Resources Engineering

B) Agricultural and Biosystems Structures and Environment Engineering

C) Agricultural and Biosystems Power, Energy and Machinery Engineering

Question 32: It refers to the processing of raw agricultural and fishery products into semi-processed or finished products which include materials for the manufacture of food and/or non-food products, pharmaceuticals and other industrial products.

A) Food Processing

B) Agricultural Mechanization

C) Agriculture and Fisheries Modernization

D) Agro-Processing Activities

Question 33: Also known as Coconut Farmers and Industry Trust Fund Act or Coco Levy Law. An act creating the coconut farmers and industry trust fund, providing for its management and utilization, reconstituting for the purpose the Philippine Coconut Authority Board and for other purposes.

A) RA 10915

B) RA 11203

C) RA 11524

Question 34: An act promoting agricultural and fisheries mechanization development in the country.

A) Republic Act No.112

B) Republic Act No. 8435

C) Republic Act No. 10601

Question 35: It refers to the local activity or series of activities to maintain or raise the uality or change the form or characteristics of agricultural, fisheries and orestry products.

A) Agricultural Food Processing

B) Agricultural and fisheries machinery

C) Agricultural and fisheries mechanization

D) Agro-industrial processing

Question 36: Also known as PRESIDENTIAL DECREE (P.D.) NO. 1096. Its provision hall apply to the design, location, siting, construction, alteration,repair, conversion, use, occupancy, maintenance, moving, and demolition of, and addition to, public and private buildings and structures.

A) Mandanas-Garcia Ruling

B) Building Permit

C) National Building Code of the Philippines

Question 37: It refers to any boat, ship or other watercraft of three (3) gross tons or less, equipped to be used for taking of fishery species or aiding or assisting one (1) or more vessels in the performance of any activity relating to fishing including, but not limited to, preservation, supply, storage, refrigeration, transportation and/or processing.

A) Fishing boat

B) Industrial boat

C) None of the above

Question 38: It shall be formulated and implemented by the DA: Provided, That the DA,through the Philippine Center for Postharvest Development and Mechanization (PHilMech) as focal agency, shall integrate and unify all agricultural and fisheries mechanization RDE programs and projects of all concerned national government agencies, Local Government Units (LGUs), state universities and colleges (SUCs), which shall be geared towards development of machineries and equipment, job generation, address market and industry demands and help accelerate agricultural and fisheries modernization in the countryside.

A) None of the Choices

B) Agri-fisheries Mechanization Research and Development and Extension Network

C) Agri-fisheries Machinery and Equipment Service Centers for Research and Development Extension

D) Unified National Agricultural and Fisheries Mechanization Research and Development and Extension (RDE) Agenda

Question 39: These are legal agreements between a business entity and an engineering company/engineer detailing and providing engineering services and payment for those services.

A) Engineering Contract

B) Business Permit

C) License-to-Operate

Question 40: It refers to a regional arrangement entered into by the ASEAN Member States, predicated on the mutual recognition of qualifications, requirements met, licenses and certificates granted, experience gained by professionals, in order to enhance mobility of professional services within the region.

A) Accredited Integrated Professional Organization or the Accredited Professional Organization or AIPO/APO

B) ASEAN Qualifications Reference Framework or AQRF

C) ASEAN Mutual Recognition Arrangement or ASEAN MRA

Question 41: It refers to the application of engineering science and designs to the processes and systems involved in the sustainable production, post production and processing of safe food, feed, fiber, timber and other agricultural and biological materials and the efficient utilization, conservation, and management f natural and renewable resources in order to enhance human health in harmony with the environment.

A) Agricultural and Biosystems Power and Machinery

B) Agricultural and Biosystems Engineer

C) Agricultural and Biosystems Engineering

Question 42: It is hereby organized and composed of research and educational institutions, LGUs, nongovernment organizations and the recognized and well-established associations of agricultural and fisheries machinery assemblers, manufacturers and distributors, agricultural engineers, farmers and fisherfolk.

A) Agri-fisheries Machinery and Equipment Service Centers

B) Unified National Agricultural and Fisheries Mechanization Research and Development and Extension (RDE) Agenda

C)Agri-fisheries Mechanization RDE Network

Question 43: About how long upon the enactment of AFMech Law does all manufacturers, fabricators, assemblers and importers must register with the BAFE.

A) Within one (1) year

B) Within three (3) months

C) Within six (6) months

Question 44: A term when a Geothermal Energy is produced where the water is replenished by rainfall and the heat is continuously produced inside the earth.

A) Enhanced Recharge

B) Natural Recharge

C) None of the above

Question 45: About how long upon the enactment of AFMech Law does the registrants must submit to the BAFE the list of equipment/machineries manufactured/fabricated/assembled/ imported.

A) Three (3) years

B) Five (5) years

C) One (1) year

Question 46: It shall coordinate, plan and execute agricultural and fishery mechanization and postharvest RDE programs and projects of the DA.

A) Bureau of Agriculture and Fisheries Product Standards (BAFPS)

B) Bureau of Agricultural and Fisheries Engineering (BAFE)

C) Philippine Center for Postharvest Development and Mechanization (PHilMech)

Question 47: The agency mandated to develop standards for agriculture and fishery machinery, tools and equipment.

A) PhilMech

B) AMTEC

C) BAFS

D) BAFE

Question 48: It includes refrigeration and cold storage, agri-industrial and biosystems application of electrical energy and electronics, agricultural products process engineering, and food and bio-based products process engineering.

A) Agricultural and Biosystems Power, Energy and Machinery Engineering

B) Land and Water Resources Engineering

C) Agricultural and Bioprocess Engineering

Question 49: It refers to the development of systems, processes, and equipment for agricultural waste disposal and utilization and environment-friendly technologies such as, but is not limited to, compost plants, biogas plants, biomass utilization technologies, systems and processes.

A) Agricultural and Biosystems Power and Machinery

B) Agricultural and Bio-Processing

C) Agricultural and Biological Waste Utilization and Management

Question 50: It shall develop standards for agriculture and fishery machinery, tools and equipment in coordination with accredited testing centers, and other concerned government and private entities.

A) Bureau of Agricultural and Fisheries Engineering (BAFE)

B) Philippine Center for Postharvest Development and Mechanization (PHilMech)

C) Bureau of Agriculture and Fisheries Product Standards (BAFPS)

YOUR SCORE:

Total Questions Attempted: 0

Correct Answers: 0

Wrong Answers: 0

Percentage: 0%

COMMENT DOWN YOUR SCORE!